Shuttle AV40R VIA P4X266 socket 478
Mercredi, 24 Octobre, 2001
Suite: Le setup des tests
Model AV40/R
Chipset
(North) VIA P4X266:
Support Pentium 4 System bus
Support DDR 200 / 266 SDRAM interface
(South) VIA VT8233
Built in high bandwidth 266MB/S
Form Factor
ATX
Processor
Intel Pentium 4 in the 478 pin package
Expansion Slot
Support external AGP V2.0 compliant VGA device
Support 1X, 2X, 4X AGP data transfer
5 x PCI slots
Onboard Audio
VIA AC'97 2.1 compliant CODEC
Memory
3 184pin DDR DIMM Slot
On board IDE Controller
2 x UltraDMA/100 Bus Master IDE from ICH2
2 x UltraDMA/100 promise 265R to support RAID 0 (AV40R model only)
80-pin Cable Backward Compatible Legacy ATAPI Devices
Back Panel
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB Ports
1x Game / MIDI Port
1x Line in, 1x Line out, 1x Mic
Connectors
1 x ATX power connector
1 x 4 pin 12V ATX power connector
1 x 6 pin 5V / 3.3V ATX power connector
4 x Fan Power connectors (one for system chipset fan)
4 x UltraDMA/100 Bus Master IDE (AV40R model only)
1 x Floppy
BIOS
Stored in 2 Mb flash memory
DMI 2.3
CPU 100 / 133MHz FSB setting
BIOS FSB step-less setting from 100MHz to 166MHz with 1 MHz increment
CPU core voltage setting from +0.025V ~ +0.20V
AGP (Vddq) voltage setting from +0.05V ~ +0.20V
I/O voltage setting from +0.1V ~0.2V
Support IRQ manual assign table
Bootable from Floppy, ATAPI device, USB device, SCSI device
|
