Thursday, June 28, 2001

Technical details

Plenty of space has been left open around the CPU socket to allow for the installation of the rather large HSF unit usually required by P4 processors.

The memory slots are located far enough from the AGP port that there is little chance of a retention bar coming into contact with the graphics card.

The voltage regulation circuits and its components are standard to the P4 motherboard design.

Most of the power connectors are located on the lower right corner of the mainboard but the 4-pin 12v connector that is located on the left side of the CPU socket right behind the audio connectors.

Three fan connectors are included, and all of them are controlled by the hardware monitoring system.

It's possible to manually assign IRQs.

The AGP slot does not support AGP Pro graphics cards.

Suite: Additional features