Iwill VD133 VIA Apollo Pro133 mainboard
Monday, November 22, 1999
The features (continued)
Additional features included with the VD133, include: Wake on LAN, Wake on Modem Ring, PS/2 connectors for mice and keyboards, USB connectors, RX/TX infrared connectors, Power-on from mouse/keyboard or timer, Suspend to Disk, and an SB-Link. Hardware monitoring via Winbond W83781 of fan speed, CPU temperature, and environmental temperatures are also included as standard features.
Below, a photo of the VD133 gives us a good view of its components.
Note: Click here for detailed specifications of the VD133.
Installation
Installation of this motherboard is quite simple. In fact, there is no need to fool around with jumpers JP11, and JP12, as an automatic frequency adjustment is made according to the processor detected.
The Software Bundle
The installation CD contains: The 4-in-1 Via Apollo Pro133 driver pack, McAfee Antivirus, a Suspend to Disk utility, the Hardware Doctor utility for monitoring hardware, a CD version of the user's manual, and Adobe Acrobat Reader for reading PDF files.
Suite: The Test Results
VD133
Specifications
|
|
Processor
|
Supports Intel Pentium II/III processor up to 550MHz or above and
PPGA Celeron processor via IWILL Slocket.
|
|
|
Chipset
|
VIA Apollo Pro 133 AGPset
Winbond W83977EF I/O Set
Winbond W83781D Hardware Monitor Controller
|
|
|
Bus Frequency
|
Supports 66/75/83/100/103/105/110/112/115/120/124/133/140 to 150 Mhz System Bus Clock Selection
Selectable CPU Multiplier Setting from 3x to 8x with 0.5 increment
Supports "Bye-Bye Jumper"; Iwill Smart Setting.
Adjustable Vcore (+5%, +10%) & VIO (3.4V, 3.6V, 3.8V)
|
|
|
System Memory
|
Supports 3 x 168 pin 3.3V unbuffered SDRAM
Supports PC-133 SDRAM from 8MB up to 1.25GB
Supports ECC SDRAM Module
Supports VCM (Virtual Channel Memory) SDRAM
Supports SPD SDRAM Module
|
|
|
On Board IDE
|
Dual Ultra DMA 33/66 IDE Ports
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120
|
|
|
I/O Interface
|
1 x Floppy port
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Parallel Port
2 x Serial ports
2 x Ultra DMA 33/66 Bus Master IDE ports
|
|
|
Expansion Slots
|
1 x AGP Slot, Supports AGP 2X Mode
5 x PCI Bus Master Slot, 33MHz PCI 2.1 compliant
2 x ISA Slot, 16 bit ISA bus
|
|
|
BIOS
|
2-Mbit Flash ROM with Write Protection
Y2K Ready
Award BIOS with Green,
Plug & Play
ACPI for PC 98/Win 98 compliant
IDE, LS120, ZIP, and CD-ROM Bootable
"Bye-Bye Jumper"IWILL Smart Setting for BIOS CPU Frequency Setting
Key Board Power on
Suspend to Disk (STD)
Wake on LAN (WOL)
Wake on Modem (WOM)
RTC Alarm
|
|
|
Board Size
|
|
ATX Form Factor, 188mm x 305mm, 4 layers
|
|
|
Package Contents
|
1 x Iwill Motherboard
1 x User Manual
1 x Iwill Power Installer CD
1 x 80 pin IDE Cable
1 x 40 pin IDE Cable
1 x 34 pin Floppy Cable
1 x 3 in 1 Retention kit (for SECC, SECC2, SEPP processor)
|
|
|
Options
|
IWILL Slocket
Convert PPGA Celeron to Slot1 Celeron
IWILL SIDE series SCSI Controller
SIDE2935LVD:
ULTRA2 SCSI, 80MB/Sec, data transfer rate.
SIDE 2936UW:
ULTRA WIDE SCSI, 40MB/Sec, data transfer rate. Both Mac / PC compatiable.
SIDE 2930U+:
ULTRA SCSI, 20MB/Sec, data transfer rate. Both Mac / PC compatiable.
SIDE 2930C:
FAST SCSI controller for MO, CD-R, CD-R/W, CD-ROM, ScannerÁK
Both Mac / PC compatiable
|
|
