DFI NT70-SA i850 socket 478
Thursday, December 20, 2001
Next: Test setup
|
NT70-SA
|
| CPU Supported | | Intel Pentium 4 processor (Supports 400MHz system data bus) |
| | Memory | 4 x RIMM sockets
max. 2GB
Support PC600 or PC800 RDRAM and ECC |
| PCI IDE | PIO mode 4 EIDE channels up to 4 IDE devices
UltraDMA/100 transfer rate up to 100MB/sec |
| Super I/O | 2 x NS16C550A compatible UARTs
1 x SPP/ECP/EPP parallel port |
| External Connectors | | 2 x USB, 1 x RJ45 LAN, 2 x DB-9, 1 x DB-25, 1 x PS/2 keyboard, 1 x PS/2 mouse, 1 x game/MIDI, 3 x Audio jacks |
| Internal Connectors | | 1 x connector for 2 additional external USB, 1x IrDA, 2 x RAID IDE, 2 x IDE, 1x Floppy, 3 x ATX power, 3 x fan, 1 x WOL,1 x WOR, 1 x opened chassis alarm, 3 x internal audio connectors |
| Power Management | ACPI and OS direct power management
Wake-on event: RTC timer/USB Keyboard/USB Mouse / Modem/LAN/Keyboard/Mouse |
| Hardware Monitor | | System, processor temperature, voltage and fan speed |
| Expansion Slots | 1 AGP slot (Supports 1.5V AGP 4x)
5 PCI slots
1 CNR slot |
| Audio On Board | | AC`97 Audio codec |
| Other features | | RAID 0 or 1, Intel 82562ET LAN, STR |
| Form Factors | ATX, 6 layers
30.5 cm x 24.4 cm
12.05 inch. x 9.6 inch. |
All specifications above are subject to change without prior notice. |
|
