MSI 845PE Max2 FIR socket 478 DDR333
Friday, November 01, 2002
Next: Test setup.
Compare motherboard prices
Find the best price for the: 845PE Max2 FIR
CPU
Supports
Socket 478 for Intel® Pentium 4 processor
• Supports up 3.06G/533MHz and higher speed
Chipset
Intel® 845PE chipset
- FSB 533 MHz.
- Supports DDR 266/333 DDR technology.
- 1.5 V AGP 4X and PCI advanced high performance memory controller.
Intel® ICH4 chipset (421 BGA)
- Integrated Direct Sound AC97 audio.
- Dual channel Ultra DMA 66/100 master mode IDE controller.
- ACPI & PC2001 compliant enhanced power management.
- Integrated USB 2.0 controller.
FSB
• Support 100/133MHz FSB
• Support 400/533MHz Intel NetBurst micro-architecture bus.
Main Memory
Supports four memory banks using three 184-pin DDR DIMMs.
• Supports up to 2GB PC2700/PC2100 DDR SDRAMs.
• Supports 2.5v DDR SDRAM.
Slots
One AGP (Accelerated Graphics Port) slot.
- Supports AGP 1.5 4x.
• Six 32-bit Master PCI Bus slots.
• One CNR (Communication Network Riser) slot.
On-Board
IDE
Dual IDE controllers integrated in Promise 20275/20276.
PIO, Bus Master and Ultra DMA66/100/133 operation modes.
Pomise RAID
ATA133 IDE RAID, 0 or 1
Bluetooth
1 Bluetooth connector for wireless connection.
On-Board Peripherals
1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M
and 2.88Mbytes
1 serial port (COM A)
1 parallel port supports SPP/EPP/ECP mode.
1 IrDA connector for with Intel® & MSI pin-definition
1 Line-in/Line-out/MIC port
C-Media 8738 6 channel audio SPDIF (Optional)
6 USB 2.0 ports (Rear * 4/ Front * 2)
1 RJ-45 LAN jack (optional)
1394 port controlled by VT6306 (Optional)
Audio
C-Media 8738MX 6-channel audio.
Lan
(Optional)
• Intel® 82540EM/82551/82562ET Dual layout.
- Integrated Fast Ethernet MAC and PHY in one chip.
- Supports 10Mb/s, 100Mb/s and 1000Mb/s.
- Compliance with PCI 2.2.
- Supports ACPI Power Management.
BIOS
The mainboard BIOS provides "Plug & Play" BIOS which detects
the peripheral devices and expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
• Supports Multi-Language
Dimension
30.5 cm(L) x 24.5 cm(W) ATX Form Factor
Mounting
9 mounting holes
|